Hack Deep Freeze

What Is Deep Freeze

• It is an Software Which Uses unique Method of disk protection.
• By using This Software User permissions are not granted to install any software on computer/Client
• Generally it is Used at Cyber Cafe,Colleges etc
• How Can I Crack It ???
• You can Crack it Just use following steps to crack Deep Freeze.

Step 1:

• First Download Deep Unfreezer
• Click Here

Step 2:

• Extract it And Install it

Remember: This Software Is detected as Hacktool.deepfreeze by your antivirus
so You need to install it in Safemode or disable Antivirus Protection

Step 3:
Click to Enlarge

• Now Open that software
• and click on Boot Thawed button 
• and Now click on load status.
• once the Status Loaded
• Click on Save Status
• Now Reboot Your System and Deep Freeze is now Hacked!!!

  

Now We have to Lock the Deep Freeze or Freeze
Then we have to freeze n Lock that State
Follow this

Step 4:

• Open that Software again
• Select the boot frozen button  
• and click on load status.

Step 5:

• Once the Status is Loading 
• Then click on save status button.

Step 6:

• Now Restart Your Computer Again
• Deep Freeze has been locked successfully.
• Njoy

How To enable USB PORT

Step 1st:  

Click on Start 
then click Run.
or
press win key + R

step 2nd:  
One box prompted,
then type regedit in that box , and then click OK


Step 3rd:
Find and Locate the following registry key:

HKEY_LOCAL_MACHINE
>SYSTEM
>CurrentControlSet
>Services
>USBSTOR

Step 4th:
In the right side, you have to find Start then double-click on Start.


Step 5th:
In the Start Value data box, type 3
  click Hexadecimal (if it is not already selected), and then click OK
and now quit Registry Editor.

How To disable USB port in windows XP ,Windows vista and 2000.

Step 1st: 
Click Start
then click on Run.
or
press win key + R

step 2nd:  
One box prompted,
then type regedit in that box , and then click OK


Step 3rd:
Find and Locate the following registry key:

HKEY_LOCAL_MACHINE
>SYSTEM
>CurrentControlSet
>Services
>USBSTOR

Step 4th:


In the right side, you have to find Start then double-click on Start.




Step 5th:
In the Start Value data box, type 4
click Hexadecimal (if it is not already selected), and then click OK
and now quit Registry Editor.

Fix USB Not Recognized

Fix For Mobile (Mass Media/Storage Mode):

• First Check out Your sd card  no password on your Card
• Use Pc suite mode (for fixing this problem)

• Now 
• Goto Device Manager
• Disable that Installed Driver Now again Enable it
• Now Restart Your Phone And Pc.
• Connect our mobile to USB's port
• Now it prompt n installation proceed

Fix For USB Not Recognized:

• Firstly Check whether Your USB port is Disabled by System or not.
• Now Follow this Steps

• Goto  Device Manager 

or

• Start
• RUN 
  type Devmgmt.msc 
• Now you have to search for
  USB Controller Hub or Universal Serial Bus controllers
  
  
• Now click Properties.
• Now Click on Power Management tab
• >Allow the computer to turn off this device to save power >click OK.
• Now Hit
  > Scan for hardware changes.
  >Now it Start Detecting New Drivers for USB.

Note:
If your Cable or Device is not Still Detected then You Have to First Troubleshoot it after Connecting it to Computer.
or Try to attach that Device with New Cable or USB.